Preparation and characterization of electroplated amorphous gold-nickel alloy film for electrical contact applications

A process for electroplating amorphous gold-nickel alloy with the atomic ratio of unity was developed. The plating bath was prepared by adding potassium cyanoaurate(I) into a known plating bath which produces amorphous nickel-tungsten alloy. At a sufficiently high gold concentration, the alloy deposit did not contain any tungsten. The amorphous nature of the Au-Ni alloy produced in the new bath was confirmed by using TEM and THEED. Hardness, resistivity, and contact resistance of this new alloy were determined, and the results are discussed for applications as an electrical contact material.     

Radical polymerization of methyl methacrylate with methyl 2,2-dimethyl-3,3-diphenyl-3-cyanopropionate as a thermal iniferter

Summary To clarify the mechanism of living radical polymerization of methyl methacrylate (MMA) with tetraphenylsuccinodinitrile (TPSN) as a thermal iniferter, a model compound for the end group of the poly(MMA) produced, methyl 2,2-dimethyl-3,3-diphenyl-3-cyanopropionate (2), was synthesized and found to initiate a living radical polymerization of MMA, indicating that the hexa-substituted C-C bond in 2 dissociated into radicals. The poly(MMA) thus obtained further initiated the radical polymerization of styrene (St) to give a block copolymer.     

Crystalline Phases and YAG Laser-Induced Crystallization in Sm2O3–Bi2O3–B2O3 Glasses

The glass formation region, crystalline phases, second harmonic (SH) generation, and Nd:yttrium aluminum garnet (YAG) laser-induced crystallization in the Sm₂O₃–Bi₂O₃–B₂O₃ system were clarified. The crystalline phases of Bi₄B₂O₉, Bi₃B₅O₁₂, BiBO₃, Sm _x Bi_{1− x} BO₃, and SmB₃O₆ were formed through the usual crystallization in an electric furnace. The crystallized glasses consisting of BiBO₃ and Sm _x Bi_{1− x} BO₃ showed SH generations. The formation of the nonlinear optical BiB₃O₆ phase was not confirmed. The formation (writing) region of crystal lines consisting of Sm _x Bi_{1− x} BO₃ by YAG laser irradiation was determined, in which Sm₂O₃ contents were∼10 mol%. The present study demonstrates that Sm₂O₃–Bi₂O₃–B₂O₃ glasses are promising materials for optical functional applications.     

Decoupling between Enthalpy Relaxation and Viscous Flow and Its Structural Origin in Fragile Oxide Glass-Forming Liquids

The structural relaxation kinetics at the glass transition in tellurium oxide (TeO₂)-based glasses has been examined from viscosity and heat-capacity measurements to clarify the features of the structural relaxation in fragile oxide glass-forming liquids. A large decoupling between enthalpy relaxation and viscous flow, i.e., a large discrepancy between the activation energies for the enthalpy relaxation (recovery), Δ H , and viscous flow, E _η, has been demonstrated in TeO₂-based glasses. The values in x K₂O· x MgO·(100 − 2 x )TeO₂ glasses, for example, are ∼919–1051 kJ/mol for Δ H and ∼ 577–701 kJ/mol for E _η, given the ratio of Δ H/E _η≈ 1.44–1.59. Some viscosity and heat-capacity data (all data have been reported previously) obtained from similar experiments in Sb₂O₃–B₂O₃ glasses belonging to the category of strong glass-forming liquids have been reanalyzed in this paper for comparison; a strong coupling was found to exist between Δ H and E _η, i.e., Δ H/E _η≈ 0.98–1.18. An origin of decoupling between Δ H and E _η in fragile glass-forming systems such as TeO₂-based glasses has been discussed by considering the glass structure model for fragile glasses; strongly bonded correlated (highly constrained) regions are surrounded or connected by weakly bonded noncorrelated (unconstrained) parts.     

Narrow multi-walled carbon nanotubes produced by chemical vapor deposition using graphene layer encapsulated catalytic metal particles

The use of graphene layer encapsulated catalytic metal particles for the growth of narrower multi-walled carbon nanotubes (MWCNTs) has been studied using plasma-enhanced chemical vapor deposition and conventional thermal CVD. Ni–C or Fe–C composite nanoclusters were fabricated using the dc arc discharge technique with metal–graphite composite electrodes carrying a current of 100–200 A in a stainless-steel chamber filled with He and CH₄ mixture gas at 27 kPa. Nano-sized grains with diameters less than 10 nm were fabricated and deposited on a Si substrate, and were used as a catalyst for MWCNT growth. Structural analyses of the composite nanoclusters and MWCNTs were carried out using transmission electron microscopy. The results show that the diameters of the MWCNTs were reduced from 50–100 nm for a conventional Ni thin film-evaporated Si substrate to a minimum of roughly 2–4 nm in the present study.     

Gigacycle fatigue data sheets for advanced engineering materials

Gigacycle fatigue data sheets have been published since 1997 by the National Institute for Materials Science. They cover several areas such as high-cycle-number fatigue for high-strength steels and titanium alloys, the fatigue of welded joints, and high-temperature fatigue for advanced ferritic heat-resistant steels. Some unique testing machines are used to run the tests up to an extremely high number of cycles such as 10¹⁰ cycles. A characteristic of gigacycle fatigue failure is that it is initiated inside smooth specimens; the fatigue strength decreases with increasing cycle number and the fatigue limit disappears, although ordinary fatigue failure initiates from the surface of a smooth specimen and a fatigue limit appears. For welded joints, fatigue failure initiates from the notch root of the weld, because a large amount of stress is concentrated at the weld toe. The fatigue strength of welded joints has been obtained for up to 10⁸ cycles, which is an extremely high number of cycles for large welded joints. The project of producing gigacycle fatigue data sheets is still continuing and will take a few more years to complete. r 2007 Published by Elsevier Ltd.     

A phenolic antioxidant from the Pacific oyster (Crassostrea gigas) inhibits oxidation of cultured human hepatocytes mediated by diphenyl-1-pyrenylphosphine

3,5-Dihydroxy-4-methoxybenzyl alcohol (DHMBA), an antioxidant isolated from the Pacific oyster (Crassostrea gigas), was studied in a cell-based fluorometric antioxidant assay using human hepatocyte-derived cells (C3A) and diphenyl-1-pyrenylphosphine (DPPP) as a fluorescent probe. In comparison with two hydrophilic antioxidants, DHMBA showed the stronger inhibition of DPPP-mediated fluorescence than chlorogenic acid and l-ascorbic acid: at a concentration of 320 μM of DPPP, the inhibition was 26.4 ± 2.6%, 11.1 ± 1.2%, and 0 ± 2.0% for DHMBA, chlorogenic acid, and l-ascorbic acid, respectively (mean ± SD, n = 4). Their relative oxygen radical absorbance capacities (ORAC) were dissociated with their cell-based antioxidant activities: 1.47 ± 0.40, 4.57 ± 0.30, and 0.53 ± 0.13 μmol TE/μmol for DHMBA, chlorogenic acid, and l-ascorbic acid, respectively (mean ± SD, n = 4). The amphiphilicity of DHMBA was better than chlorogenic acid and l-ascorbic acid might underlie this dissociation. Since the C3A cells are human hepatoma-derived cells, DHMBA might be useful in the prevention and treatment of liver diseases by involving an oxidation process.     

Effects of administration of Bifidobacterium animalis subsp. lactis GCL2505 on defecation frequency and bifidobacterial microbiota composition in humans

The aim of this study was to evaluate the changes in endogenous bifidobacteria and administered Bifidobacterium animalis subsp. lactis (B. lactis) GCL2505 (GCL2505) in the intestine after administration of GCL2505 by means of a randomized, placebo-controlled double-blind, cross-over study. An increase in the number of total bifidobacteria (the sum of B. bifidum, B. breve, B. longum subsp. longum, B. adolescentis, B. anglatum, B. catenulatum, B. pseudocatenulatum, B. dentium, B. longum subsp. infantis and B. lactis) in the feces were observed after administration of GCL2505 using species- and subspecies-specific real-time polymerase chain reaction analysis. However, the number of endogenous bifidobacteria species (excluding B. lactis) remained unchanged. B. lactis also became the predominant bifidobacterial species. Taking into account the number of GCL2505 administered, the findings further suggested that GCL2505 proliferated in the intestine. In addition, the defecation frequency increased during GCL2505 administration compared with the placebo. Moreover, a single administration study (n=17) clearly demonstrated that GCL2505 successfully reached the intestine before proliferating at least 10-fold. This is the first report to show an increase in intestinal bifidobacteria, with no changes to the endogenous species, and improvements in constipation following proliferation of administered bifidobacteria.     

Sphingomyelinase C from Streptomyces sp. A9107: Unusual primary structure for bacterial sphingomyelinase C

A sphingomyelinase C (SMase) was identified in the culture supernatant of Streptomyces sp. A9107 (S-SMase). Although S-SMase seems to be a typical bacterial SMase, the primary structure of S-SMase was unusual for known bacterial SMase. The gene was functionally overexpressed in the culture medium of recombinant Rhodococcus erythropolis.